Take and Pass a Unit of Competency before Using Explosive Power Tools from Pro Training Australia
07 February 2023Industries often require machines and tools in carrying out processes related to the assembly and production of a wide array of products. Some are intended to cut portions of the workpieces. Others, alternatively, are meant to connect and fasten them optimally.
One of the tools that professionals use today is the explosive power tool.
An Overview of Explosive Power Tools
Explosive power tools or explosive-actuated tools are tools that take advantage of an explosive cartridge or gas discharge to fire a fastener into materials like concrete, mild steel, masonry, and others. Some fasteners that these tools can fire into hard materials are studs, pins, dowels, rivets, screws, and spikes. The force generated by these tools can be powerful. Hence, they should always be handled and used with care.
Failure to use these tools properly, after all, may pose hazards like excessive noise, flying objects, and property fires. Ideally, they must be treated similarly to firearms. Hence, they should only be used by operators who have been trained and certified.
Using Explosive Power Tools Properly
As mentioned earlier, explosive power tools can be dangerous if they are not utilised properly. To ensure that they can fasten things optimally, they should only be used by operators who have undergone proper training.
Operators who will be using these tools are required to wear adequate personal protective equipment like eye and skin protection. They must then ensure that the explosive power tools are clean and in good working order. Their moving parts must likewise operate freely, and their barrels are not blocked in any way. Some of these tools must be fitted with a protective guard at least 75 millimetres in diameter. The guard should then be installed at right angles to the tools’ barrel and centred on the muzzle end of the tool.
Explosive power tools can only be used unguarded if the speed of the fasteners fired from them will not exceed 90 metres per second. Operators must, ultimately, never point these tools at a person, even if they are not loaded.
Unit of Competency from Pro Training
Explosive power tools must be utilised optimally. But if you want to master them, you may want to take and pass a Unit of Competency for Explosive Power Tools from us at Pro Training Australia. Our Unit of Competency specifies outcomes needed to apply safe and effective operation of explosive power tools. It supports the achievement of skills to safely and effectively utilise a range of these tools that are often used in the construction industry.
Some required skills for this unit are communication skills to determine requirements, follow instructions, enable clear and direct communication, use questioning to identify and confirm requirements, share information, and follow instructions, ability to read and interpret documentation, accuracy in reporting to appropriate personnel any faults in tools, numeracy skills, organisational skills, teamwork skills, and technological skills.
Required knowledge for this unit, alternatively, includes construction terminology, equipment safety manuals and instructions, explosive power tools materials, charges, and fasteners, job safety analysis and safe work method statements, material safety data sheets, material storage and eco-friendly waste management, plans, specifications, and drawings, processes for the calculation of material requirements, quality requirements, relevant acts, regulations, and codes of practice, security and storage procedures, and many more.
Optimized by: Netwizard SEO